Goods-Passenger Lifts

Goods-Passenger Lifts of loads from 900 to 12.500 kg and higher provide transportation of goods and accompanying persons. As a rule, the GPL-lifts of higher loads are adapted for loading / unloading by means of forklifts. The lifts are equipped with direct drives with two or four EC type pistons (telescopic with mechanical synchronization) or TCS (for narrow shafts) pistons. If it is necessary, the pawl devices are used additionally to stabilize the lift cabin’s floor during loading with forklifts.

Introduce

The direct drive using a unique in the world technique GMV(Goods-Passenger Lifts) 1: 1 Technology. Telescopic pistons type EC/TCS of GMV Sweden AB production with 100 percent synchronization impacting the lift operation and longevity (impossible to be reached by other solutions).

Very high value of the maximum force on the cabin’s door sill allowing the forklifts loading the lifts from 2 tons on.

High durability and reliability due to the small number of parts (including rotating ones).

Low operating and maintenance cost.

Simple and ultra light construction in comparison with other electric and hydraulic vehicle lifts.

Exceptionally small size of the lift shaft with respect to the cabin’s dimensions.

Minimum pit of 1,0 m.

Exceptionally stable cabin’s floor position during vehicles entering – it is not possible to be achieved in case the lift car is mounted on ropes (hydraulic 1:2 and traction 4:1 goods lifts ).

Standard load range from 2,0 up to 12,5 t and optional over 12,5 t.

High resistance to asymmetrical loading of the cabin.

Possibility of increasing load capacity at constant cabin size.

Central door enabling quick and safe loading.